Honda 3D Printable STL & CAD Catalog
Scan-verified replacement clips, cupholder assemblies, console repair brackets, and restoration hardware for Honda vehicles. Immediate download with STL & 3MF formats.

Honda Civic Door Speaker Adapter mounting ring replacement part.

Honda S2000 Rear Sides Skirt Splitters V2 aerodynamic replacement parts.

This model is a functional and aesthetic 3-D-printable solution designed as a S2000 Wiper Lid Logo (wiper cap / delete plug). It is designed...

This model is a functional and aesthetic 3-D-printable solution designed as a S2000 Wheel Center Cap / Deckel. It perfectly replaces missing...
_01.jpg)
This model is a highly functional 3-D-printable engineering solution designed as S2000 Trunk Supports (Trunk Skeleton Reinforcement / Wing B...

This model is a shorter, sporty, and modern-looking "stubby" antenna designed to replace the outdated and long factory antenna on S2000 (AP1...

This model is a functional 3-D-printable solution designed as a S2000 Splitter Diffuser RH (Right Hand side aerodynamic body extension). It ...

This model is a functional 3-D-printable solution designed as a S2000 Speaker Ring (door speaker mounting adapter / spacer ring). It provide...

This model is a functional 3-D-printable solution designed as a S2000 Speaker Ring (door speaker mounting adapter / spacer ring). It provide...

This model is a custom-designed 6.5-inch (165 mm) speaker mounting adapter ring specifically made for S2000 vehicles.

This model is a practical side storage add-on designed for the interior of S2000 (AP1/AP2) vehicles. It perfectly expands your limited cabin...

This model is a custom shift knob designed for S2000 (AP1/AP2) vehicles. It refreshes your interior look and provides a sporty shifting feel...

This is the updated V2 model of the rear side skirt splitter add-on, specifically designed for the S2000 (AP1/AP2) rear bumper sides to further enhance the aero
_01.jpg)
This model is a functional and aesthetic 3-D-printable solution designed as a S2000 Radio Pocket (Long Version). It perfectly fills the stan...

A custom oil filter wrench designed specifically for the S2000 (AP1/AP2) OEM (PCX-004) oil filter. It fits perfectly over the filter flutes ...

This model is a custom-designed wrench specifically made to easily open and tighten the oil filler cap on S2000 (AP1/AP2) vehicles without s...

This model is a custom-designed hardtop mounting and securing bracket specifically made for S2000 vehicles.

This model is a practical grab tab designed to make opening the fuel door (gas door) on S2000 (AP1/AP2) vehicles much easier. It provides a ...
_01.jpg)
A custom-designed front lip (splitter) for the S2000 (AP1/AP2) front bumper, providing a -45mm lower and more aggressive stance. Important: ...

This model is a front license plate cover (delete plate) designed for the S2000 (AP1/AP2) front bumper, providing a clean, aesthetic, and sm...

This model is a custom front bumper air duct designed for S2000 (AP1/AP2) vehicles. It adds a sporty aesthetic to your front bumper and help...

This model is a functional 3-D-printable solution designed as a S2000 Dash Panel Part. It replaces missing, broken, or customized panel sec...

This model is a functional and aesthetic 3-D-printable solution designed as a S2000 Bezel (gauge/console trim frame). It perfectly replaces ...

This model is a functional 3-D-printable solution designed as a S2000 Alternator Bracket. It is engineered to securely and vibration-free mo...
.jpg)
This model is a functional 3-D-printable solution designed as a S2000 Intake Base Long (long version air intake mounting base). It provides ...

This AC Vent is designed to fit the air conditioning vent section of vehicles. It provides a practical and durable replacement when the orig...

This model is a CR-V Door Speaker Adapter designed as a functional 3D printable modeling solution.

This model is a protective dust cover designed for the S2000 (AP1/AP2) headlight bulb and wiring opening. It acts as a perfect replacement t...

This model is a Civic Tweeter Adapter (Top Mount) designed as a functional 3D printable modeling solution.

This model is a Civic R165X3 Speaker Adapter designed as a functional 3D printable modeling solution.

This model is a Accord 7th Gen 6.5" Front Door Speaker Adapter designed as a functional 3D printable modeling solution.

This model is a 2002 CR-V Speaker Adapter designed as a functional 3D printable modeling solution.

This model is a 1990 Prelude Speaker Adapter designed as a functional 3D printable modeling solution.

This is the updated V2 model of the rear side skirt splitter add-on, specifically designed for the S2000 (AP1/AP2) rear bumper sides to furt...

High precision 3D CAD replacement model for Civic R165X3 Speaker Adapter. Clean mesh topology, verified OEM fitment.

High precision 3D CAD replacement model for Honda Civic Oil Funnel. Clean mesh topology, verified OEM fitment.

High precision 3D CAD replacement model for Honda Civic Speaker Adapter. Clean mesh topology, verified OEM fitment.
.jpg)
A replacement sun visor retaining clip hook bracket designed for the 2002 Odyssey minivan interior. Holds the sun visor rod securely against the roof ...
.jpg)
A replacement sun visor retaining clip hook bracket designed for the Ridgeline pickup interior. Restores firm visor latching support when factory clip...